Hi guys, welcome back to a further Hugh Jeffreys video. Today, were tackling a properly-abused iPad Pro sent in by using a viewer. The to come back is lined in deep scratches and dents, making it look like it turned into dragged across concrete. The the front monitor is shattered, barely retaining on, and the house button has fallen interior, rendering it non-purposeful.
Background
The viewer, Happy Phone from Gemana, Australia, acquired the iPad for 50 greenbacks. It had a display screen that was past shattered. After replacing the screen, phone repair they simplest used it for a week previously losing it on concrete, resulting in the injury we see here. This is a primary-technology iPad Pro with 32GB of garage, jogging iOS 13.0 beta. While the iPad still just a little capabilities, the fingerprint reader is disabled, and the contact input doesnt paintings in all spaces.
Initial Inspection
Taking a closer appearance, the home buttons bracket is unfastened, and there appears a chunk of paper jammed inside of. As this iPad turned into donated, I made a decision to head all out and exchange the whole damaged parts to make it seem to be new once more. Thanks to iFixit for sponsoring this video and supplying a brand new display. You can get areas, instruments, and publications at iFixit.com/Jeffreys.
Disassembly
Getting within the iPad used to be less demanding than long-established on account of the poorly attached screen, which I could just lift off. Inside, it was once lacking screws and had break to the shields. The outdated adhesive wasnt adequately cleaned off, explaining why the reveal didnt hang.
Next, I eliminated the the front reveal, getting rid of the two screws maintaining its bracket and disconnecting its flex cables. After doing away with any ultimate glass round the perimeter, I unfastened all screws at the bracket over the common sense board. There become additionally a lacking screw here, requiring me to uncover replacements later.
After disconnecting the battery, I tackled the speaker assembly, which turned into held in with totally effective adhesive and a couple of cables. It required careful prying to restrict hurt. Following this, I got rid of the headphone jack to clean the direction for the speaker meeting.
Logic Board and Battery
Removing the good judgment board was once demanding simply by the adhesive preserving it down. I unplugged all connecting cables, taking more care around the soldered charging port and upper flex cable. The battery was once further glued down, requiring a remarkable amount of alcohol to damage down the adhesive.
The Setback
Everything was going according to devise except I encountered the good connector port. Despite being held in with a bracket, it changed into glued in beyond whatever thing Id considered. No formula I tried ought to dislodge it, and sooner or later, the cable broke off. This halted the venture for 12 months until eventually I might discover a alternative. Many months later, I came upon one on iFixit, enabling the assignment to retain.
Continuing the Restoration
Proceeding with the restoration, I got rid of the last factors from the vintage body, including the audio system, antenna, and quite a few buttons. The magnets used for Apple instances have been exceedingly tough to eliminate by reason of their robust adhesive and exhausting-to-achieve placement.
Reassembling started with installation the best phone repair near speaker grilles in both corner, observed by way of the antenna and amount buttons. I glued the microphone lower back into role until now installing the pressure button and its flex cable, accompanied through the camera and LED flash.
The next step became gluing all of the magnets back into the recent casing. To be sure accurate alignment, I attached an Apple Smart Cover case beforehand the glue dried. With the magnets in region, I installed the keeping brackets.
Final Assembly
The common sense board become mounted subsequent, hoping the iPad would nevertheless perform after over a 12 months without capability. I then geared up the recent battery, connecting the shrewd connector and securing it with screws. The headphone jack, entrance-dealing with digital camera, and top speakers have been reinstalled, accompanied by using the charging port and backside audio system.
After replacing the missing screws with those harvested from a donor iPad mini, I attached the adhesive for the new reveal panel. Salvaging the outdated domicile button, I established it into the brand new display, ensuring it was once secured against the glass to restrict it from falling contained in the iPad back.
Testing and Conclusion
With the recent reveal linked, it changed into time to test the iPad. It powered on, and the whole lot gave the impression to be operating. I wiped clean the inside with a microfiber material and got rid of all protective movies previously urgent the monitor firmly into region. After letting the adhesive set for some hours, I removed the remaining shielding film, revealing a fully restored iPad Pro.
Thanks to Happy Phone for sending during this iPad, and because of you for looking at. If you liked what you observed, hit the subscribe button and cost out the tablet playlist for extra movies like this one. If you might be shopping for used gadgets, verify out my web page, link in the description. Thats keen on this video, and Ill capture you subsequent time.